Prodigy Player Pro is a tool that works with the FPGA-based prototyping platforms from S2C. Prodigy Player Pro plays three roles in speeding your development process - it configures the prototype, runs remote system management and provides set up for multi-FPGA debugging.
Faster partition engine supporting billion gate designs
Enhanced pin-multiplexing macro increases system performance up to 50%
Flexible pin-multiplexing ratios across multiple clock domains
Up to 70% time saving via optimized black-box flow
Fully automate and increase productivity with TCL scripting
An integrated GUI environment and Tcl interface makes it easy to take an existing design, compile it, partition it into multi-FPGAs, and generate the individual bit files.
Prodigy Player Pro - Compile time has an intuitive GUI environment to guide all compile steps. After a design is compiled once, you can perform an ECO flow automatically in Tcl mode:
Import design
Set up probes
Run synthesis
Partition design
Assign & I/Os
Run FPGA place and route
Generate bit file(s)
Prodigy Player Pro - CompileTime provides a library of S2C daughter board pin-map files, and automatically matches them to I/O connectors. GUI-based clock and I/O properties assignment minimizes chance of error.
Automatic and guided partitioning to multiple boards
- User-guided performance optimization
- User configurable cable connection setup
Black-box approach to save partitioning time
Enhanced system performance by TDM optimization
Pre-qualification of signals before automatic pin-multiplexing insertion
Timing estimation to quickly understand the performance before place and route
System timing report to guide the optimization
Prodigy Player Pro - DebugTime allows users to pre-select the signals to be observed before compilation and define the trigger conditions to start a data capture. During runtime, the selected signals are captured and stored in an external DDR4 memory for analysis.
Preserve internal FPGA probes
Probes are distributed to multiple FPGAs automatically based on the partition results
Set up trigger and trace signals in multiple FPGAs from a single console
Users can easily set the trigger events and combinational events through the Prodigy Player Pro Debug panel.
Trigger Events support: ==, !=, >=, <=,>, < and counting
Combinational Events support: !, &, |, ^, -> and counting
Supports up to 8 event trigger blocks
Supports trigger state machine language
Mark an unlimited number of internal FPGA probes
Trace up to 16K probes per FPGA in 8 groups of 2K probes each without FPGA re-compilation
MDM Pro hardware is required.
IP mode and Compile mode simplify the process and usage
Transmit trigger and trace data from multiple FPGAs to MDM Pro through high-speed transceivers
Write the sample data in VCD/FST format for analysis
Store large external 64GB of waveform
For compiled designs, Prodigy Player Pro - RunTime enables you to remote control and monitor the target portotyping platforms, through either Ethernet or USB connections.
Prodigy Player Pro can download the design to the FPGA(s) through USB or Ethernet. It can also write the design to an SD card on the Prodigy Logic Modules/Systems/Matrix and download the design from an SD card.
All system features can be controlled remotely through USB or Ethernet.
Automatic detection of daughter cards when plugged in
Easy monitoring I/O voltages, currents and temperatures
Support direct access to the internal registers and BRAM
Controlling multiple Prodigy Logic Modules/Systems conveniently from one console
A step-by-step wizard enables users to check for potential broken I/O pins, interconnection nets and clock lines. Users can also verify the global clock frequencies and I/O voltage settings.
Prodigy Player Pro provides virtual switches and indicators that you can use just like real hardware.
Virtual LEDs for quick monitoring of design status
Virtual push buttons and switches to set design input conditions quickly
Virtual UART for convenient firmware debugging
CompileTime: VU+, VU, KU, S10 and A10
DebugTime: VU+ and VU
RunTime: VU+, VU, KU, S10 and A10
CompileTime: 64-bit RHEL7.7/7.8+, Ubuntu 16.04/18.04 & CentOS 7.3/7.6
DebugTime: 64-bit Windows 10, RHEL7.8, & CentOS 7.3
RunTime: 64-bit Windows 10, RHEL7.6, Ubuntu 16.04/18.04 & CentOS 7.4
Synthesizable RTL (Verilog, VHDL, System Verilog)
Synthesizable gate-level netlist
Mixed languages
This site uses cookies to collect information about your browsing activities in order to provide you with more relevant content and promotional materials, and help us understand your interests and enhance the site. By continuing to browse this site you agree to the use of cookies. Visit ourcookie policy to learn more.
.png)
