Prodigy eMMC Memory Module
JEDEC/MMC standard version 5.0 compliant, MMC V4.41 compatible, and fully backward compatible with previous Multi-Media Card system.
Support high priority interrupt scheme and back ground operation.
Default data bus width is 1-bit, can be configure to 4-bit or 8-bit.
Occupies one Prodigy I/O connector
Prodigy DDR4 Memory Module
DDR4 Memory Module: Supports VU/KU Prodigy LM except Single/PCIe
DDR4 Memory Module Type D: Supports A10/S10 Prodigy LS only
DDR4 Memory Module for Single VU: Supports Single VU440 Prodigy LM only
Prodigy DDR3 Memory Module
DDR3 Memory Module: Supports VU/KU Prodigy LM except Single/PCIe
DDR3 Memory Module Type B: Supports A10/S10 Prodigy LS only
DDR3 Memory Module for Single VU: Supports Single VU440 Prodigy LM only
Pre-tested DDR2/DDR3/DDR4 SO-DIMM Memory Module
2GB DDR2 @ Up to 400MHz clock rate
2GB DDR3 @ Up to 800MHz clock rate
8GB DDR3 @ Up to 800MHz clock rate
High speed 8GB DDR4
Prodigy 18MB SRAM Module
Contains two 72Mbit ‘NO WAIT’ state bus SRAMs
Memory width selectable as 36bits or 72bits
Up to 117MHz access frequency
SRAM I/O Voltage is +1.8V
Occupies one Prodigy I/O connector
1GB DDR3 Memory Module for K7 Logic Module
Two Micron MT41J256M16HA-125 or equivalent DDR3 SDRAM devices
On-board 200MHz system clock
Up to 800Mbps data rate
I/O voltage operating at 1.5V
Occupies one LM I/O connector
This site uses cookies to collect information about your browsing activities in order to provide you with more relevant content and promotional materials, and help us understand your interests and enhance the site. By continuing to browse this site you agree to the use of cookies. Visit our cookie policy to learn more.
-383.png)
