The General Peripherals provides SoC/ASIC with many common interfaces such as USB, PCIE, PCI, Gigabit Ethernet. The Mictor interface module provides the Prodigy Logic Module with a convenient probe to connect to the Agilent logic analyzer.
Prodigy ETM4 Module
One ARM ETM4 interface
One ARM JTAG interface
One 9-pin UART interface
One 3-pin UART interface
One SD card socket
One Micro SD card socket
Occupies one Prodigy I/O connector
The General Peripherals provides SoC/ASIC with many common interfaces such as USB, PCIE, PCI, Gigabit Ethernet. The Mictor interface module provides the Prodigy Logic Module with a convenient probe to connect to the Agilent logic analyzer. The D-MAX interface module provides the Prodigy Logic Module with a convenient probe to connect to the Tektronix logic analyzer.
Prodigy GPIO Extension Module
Two RS232s interfaces
Two I2C interfaces
One Mictor-38 connector
One ARM JTAG interface
8 LEDs, 4 push buttons & 8 Switches
Two 20*2 pin headers
2 channels of SerDes through MMCX connectors
Occupies one Prodigy I/O connector
Prodigy Processor Peripheral Module
One NAND Flash socket
One NOR Flash socket
One SPI Flash socket
One I2C EEPROM socket
One MicroSD card socket
One ARM JTAG connector
One ARM ETM debugger trace connector
Two I2C interfaces
4 LEDs, 4 Switches and 10 Pin Headers
Occupies one Prodigy I/O connector
Prodigy PCI Interface Module
Provide a 32-bit 3.3V PCI Edge Connector
Occupies one Prodigy I/O connector
2 Channel USB2.0 OTG PHY Interface Module
Support host, device and OTG mode
x2 16bits UTMI interface & x1 8bits ULPI interface
2x5 Pin Headers on board
3 LEDs on board
2 Push Buttons
Occupies one Prodigy I/O connector
Prodigy 3 Channel RGMII PHY Interface Module
10/100/1000 BASE-T IEEE 802.3 compliant
Support for RGMII Interface
Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers
Two-wire Serial Interface and MDC/MDIO
CRC checker, packet counter
Auto-calibration for MAC interface outputs
Occupies one Prodigy I/O connector
Prodigy 3 Channel GMII Interface Module
10/100/1000 BASE-T IEEE 802.3 compliant
Support GMII Interface
Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers
Two-wire Serial Interface and MDC/MDIO
CRC checker, packet counter
Auto-calibration for MAC interface outputs
Occupies one Prodigy I/O connector
Customized Prodigy Min-SAS Module
Convert 136 GPIOs between two Prodigy connectors
Convert 4 SerDes from Prodigy connector to Mini-SAS connector
Support synchronous and asynchronous reference clock
Support 10 ~ 810MHz programmable clock as reference clock
Support 6 SIDEBAND signals for Mini-SAS connector
No external power supply needed
Occupies one Prodigy I/O connector
Prodigy 6 Channel SGMII Interface Module
10/100/1000 BASE-T IEEE 802.3 compliant
Support 2 channels RGMII Interface and 4 channels SGMII Interface
Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers
Two-wire Serial Interface and MDC/MDIO
CRC checker, packet counter
Auto-calibration for MAC interface outputs
Occupies one Prodigy I/O connector
Prodigy 6 Channel GMII Interface Module
10/100/1000 BASE-T IEEE 802.3 compliant
Support 2 channels RGMII Interface and 4 channels SGMII Interface
Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers
Two-wire Serial Interface and MDC/MDIO
CRC checker, packet counter
Auto-calibration for MAC interface outputs
Occupies one Prodigy I/O connector
Multi-FPGA JTAG Chain Tool Kit
Supports to chain JTAG ports of up to 8 Xilinx FPGA Modules of Prodigy LS into one JTAG Chain
RS232 Interface Module
Two RS232 interfaces
Application of voltage standards to RS232 interface
3.0V
1.8V
1.5V
This site uses cookies to collect information about your browsing activities in order to provide you with more relevant content and promotional materials, and help us understand your interests and enhance the site. By continuing to browse this site you agree to the use of cookies. Visit our cookie policy to learn more.
-383.png)
